Network connectivity testing

The Network connectivity page can be used for troubleshooting issues that arise because of problems in the network between the IP gateway and a remote video conferencing device being called (or a device from which a user is attempting to call the IP gateway).

The Network connectivity page enables you to attempt to 'ping' another device from the IP gateway's web interface and perform a 'traceroute' of the network path to that device. The results show whether or not you have network connectivity between the IP gateway and another device. You can see from which port the IP gateway will route to that address. For a hostname, the IP address to which it has been resolved will be displayed.

To test connectivity with a remote device, go to Network > Connectivity. In the text box, enter the IP address or hostname of the device to which you want to test connectivity and click Test connectivity.

For each successful 'ping', the time taken for the ICMP echo packet to reach the host and for the reply packet to return to the IP gateway is displayed in milliseconds (the round trip time). The TTL (Time To Live) value on the echo reply is also displayed.

For each intermediate host (typically routers) on the route between the IP gateway and the remote device, the host's IP address and the time taken to receive a response from that host is shown. Not all devices will respond to the messages sent by the IP gateway to analyse the route; routing entries for non-responding devices is shown as <unknown>. Some devices are known to send invalid ICMP response packets (e.g. with invalid ICMP checksums); these responses are not recognized by the IP gateway and therefore these hosts' entries are also shown as <unknown>.

Note: The ping message is sent from the IP gateway to the IP address of the endpoint that you enter. Therefore, if the IP gateway has an IP route to the given IP address, regardless of whether that route lies out of port A or port B, the ping will be successful. This feature allows the IP gateway’s IP routing configuration to be tested, and it has no security implications.

Note: If you are unable to ping the device then check your network configuration especially any firewalls using NAT.

	IP GW 3510
	host: IPGW

Network connectivity testing

Related topics