Adding/editing an IP VCR

To provide flexibility in the creation of auto attendant menus, you can configure up to five TANDBERG Codian IP VCRs on the IP gateway. This enables you to play any recording from a configured IP VCR as a video on the IP gateway either in full-screen mode, or as a pane on the menu screen.

To view a list of TANDBERG Codian IP VCRs configured on the IP gateway, go to Menus > Voice/video prompts.

To add an IP VCR, go to Menus > Voice/video prompts and click Add IP VCR. Refer to the information in the table below for information about the fields on that page.

Field	Field description
Name	Type a name for this TANDBERG Codian IP VCR.
Address	Type the IP address, hostname, or gatekeeper prefix for this TANDBERG Codian IP VCR.
Gatekeeper	From the drop-down menu, choose the gatekeeper to be used for connections from the IP gateway to this IP VCR. If a gatekeeper is not required, choose <none>. The gatekeepers that appear on this list are configured on the Settings > H.323 page. Note that where your IP VCR and your IP gateway are both registered to a gatekeeper, you must ensure that the numeric IDs of the recordings you want to use are registered to the gatekeeper, either directly or using the IPVCR's service prefix.

Field

Field description

Name

Type a name for this TANDBERG Codian IP VCR.

Address

Type the IP address, hostname, or gatekeeper prefix for this TANDBERG Codian IP VCR.

Gatekeeper

From the drop-down menu, choose the gatekeeper to be used for connections from the IP gateway to this IP VCR. If a gatekeeper is not required, choose <none>.

The gatekeepers that appear on this list are configured on the Settings > H.323 page.

Note that where your IP VCR and your IP gateway are both registered to a gatekeeper, you must ensure that the numeric IDs of the recordings you want to use are registered to the gatekeeper, either directly or using the IPVCR's service prefix.

	IP GW 3510
	host: IPGW

Adding/editing an IP VCR

Related topics